25. (1) Where traffic sign number RRM 001 [continuous white line] has been provided on a roadway or where two such traffic signs are provided in parallel, a driver shall not cross that sign or signs.

(2) Where traffic sign number RRM 002 [broken white line] has been provided on a roadway, a driver shall not cross that line, save where it can be crossed without danger to other traffic or pedestrians.

(3) Where traffic sign number RRM 001 and traffic sign number RRM 002 have been provided in parallel and traffic sign RRM 001 is nearer, a driver shall not cross such line, and where traffic sign number RRM 002 is nearer, a driver shall not cross the line save where it can be crossed without danger to other traffic or pedestrians.

(4) Nothing in this article shall so operate as to prevent a driver from driving across a roadway, along the centre of which the traffic signs referred to have been provided, for the purpose of entering or leaving land or premises adjoining the right hand side of that roadway.

F28[(5) Notwithstanding the reference to "provided in parallel" in sub-articles (1) and (3), the traffic signs referred to may be provided other than equal distance apart.

(6) Nothing in this article shall so operate as to prevent a driver from driving along a roadway, where traffic sign number RRM 001 (continuous white line) has been provided, where due to the width or length or both of the vehicle in relation to the road lane width, and where the vehicle is not engaged in an overtaking manoeuvre, it is necessary to straddle or marginally cross that sign.]